THP131-62 PM Synchronous Side Opening Door Operator

Using PM motro,large rotary torque,high efficiency and energy saving
Using motor synchronous with direct drag mode to transfer torque,more compact design
Strongly comfortable feelings of adjusting speed,achieve the completely closed loop control of the torque,speed and position.
Using asynchronous door clutch,car frame,car top and cabin wall installation.
Door operator load weight ≤200KG；Voltage：200V~250V，50/60Hz

Illustration about THP131-62 PM Synchronous Side Opening Door Operator:
 1. This PM synchronous side opening door operator meets the standard of
GB7588-2003(equal to EN81-1:1998standard)
2. PM synchronous side opening door operator can be installed either on the
frame or the roof easily.
 3. The technology of speed displacement vector control can make it adaptive
control according to the load.
 4. Pulled by the PM synchronous motor directly, it can run smoothly and stably
with a low noise, and a long life.
 5. Non-standard design is available design according to the different height of
the elevator cabins.
 6. Center-opening PM synchronous side door operator covers all kinds of
specifications with an opening width from JJ700mm to JJ1400mm, a maximum opening
height of HH2400mm.
 7. Rated voltage of door operator: 220VAC; rated current: 1.05A